新款上市，更-，-惠！
接触式速度检测仪是控制箱+摇臂组成
接触式皮带速度检测仪由单轮升级为双轮！
本品适用于检测带式输送机在运行中出现的胶带与主滚筒之间的打滑，防止打滑所造成的恶性事故，该产品还适用于多条胶带机联锁或停机。
接触式的速度检测仪是指触轮与皮带接触传递信号的检测仪.
new models on the market, better use, more concessions! the contact type speed detector is composed of control box&rocker arm. the contact type belt speed detector is upgraded from single wheel to double wheel! this product is applicable to detect the belt conveyor in operation between the main roller&the belt slip, to prevent the slide caused by the malignant accident, the product is also applicable to multiple belt interlock/shutdown. contact-type speed detector is the contact between the wheel&the belt transmission signal detector.


dh-s系列皮带速度检测仪可用于输送皮带运行速度的监测，当被监测的运输皮带的运行速度低于高于预先设定值时，它能发出报警或停机信号，可有效地避免事故的发生。可应用于冶金、煤炭、矿山、水泥、电力、粮食等行业的皮带运输机中，是物料输送系统中实现自动控制所不可缺少的监控装置。
皮带速度检测器具有一个或二个1～999转/分钟可任意设定的报警点。
dh-s series belt speed detector can be used to monitor the speed of the conveyor belt. when the speed of the monitored conveyor belt is lower than higher than the preset value, it can send an alarm/stop signal, can effectively avoid the occurrence of accidents. it can be used in the belt conveyor of metallurgy, coal, mine, cement, electric power, grain&so on. the belt speed detector has one or two alarm point which can be set arbitrarily from 1 to 999 rpm.
技术参数了解一下：
防护等级：ip65dh-s
皮带速度检测仪环境温度：-20℃～55℃  装置重量：8kg 负载电流：50ma dh-s皮带速度检测仪有dc110v，dc24v，ac220v等多种电源可供选择。 dh-s皮带速度检测仪有电源、报警点动作等多个led显示。
控制器电源电压：ac220v  dc24v  dc110v
消耗功率：＜3va

联系人：陈经理
地址：山东省济宁市任城区金宇路4号
手机：13165175381
电话：0537-2715466
传真：0537-2715466
email：bs13165175381@163.com